You have to apply gel polish in thin coats, just as you apply regular nail polish. The difference is curing time.
Gel polish has to be cured under a 12 watts LED or a 36 watts UV nail dryer. The gel polish dries faster and your nails will be much stronger and lasting. Users considering applying UV nail gel at home need to know how the process works as these gel are for professional use only.And what the potentials drawbacks of this product are. With knowledge, they can decide whether home application, rather than a trip. To a salon, is really good idea. Gdi nails® & Crystal-G Colour changing Gel Polish. Gdi nails temperature colour changing gel polish will change colour when heated to 91 degrees fahrenheit, Your normal body.
Temperature is 98.6 degrees but your fingertips are slightly cooler. An elevation in body temperature, for example. Running your hands under warm/hot water, going outside in hot weather, or even mood changes, will cause the nail polish colour. The colours will continue to change back and forth as your body temperature changes.
Why do i get a burning sensation during curing? When your fingers are put into the UV lamp it should not burn. If you get a flash of heat on your nails, you have apply the gel too thick. The burning can damage your nail plate and the thick gel wont cure or bond properly meaning they will lift easily.14+ days of high-performance wear. FREE from Formaldehyde, Toluene or DBP (Dibutyl Phthalate).
Brand: gdi nails® (Authentic) direct from supplier. Capacity: 8ml/0.27 fl oz.Type: soak off UV&LED gel polish. How to Apply gdi nails & Crystal-G Gel Polish. Prepare the nail, file, dry and buff the nail.
Apply a thin layer of base coat (remember to seal the edge of the nail) and cure in the UV lamp. Please note that each layer of UV GEL will leave a sticky residue. Do not remove as this helps the next layer adhere to the nail. Shake the colour coat bottle vigorously to blend.
Apply a thin layer of UV gel colour and cure in the UV lamp. Apply second layer of UV gel colour and cure in the UV lamp. Apply a thin layer of our top coat and cure in the UV lamp. (do this 2 times for longer lasting). Recommended curing time for a 36-watt UV Lamp is 2 minutes each time, while for a LED lamp it is just 1 minute each time.
How to Remove Gel Polish. Soak nails in a glass bowl filled with a small amount of pure acetone, or wrap each nail in cotton pad soaked with pure acetone for around 5 to 10 minutes. Product will start to become soft and turn flaky so you can gently file it away or slide it off using a small wooden stick.Pictures advertised should be used for best guidance only as they are studio generated under different lighting and angles. The actual colour may vary from image advertised. All your message will be reply within 24 hrs. Is by royalmail 2nd class free. Normally take between 3 to 5 days. There is a option for 1st class but at extras cost. We are happy to accept return for all our produce if return on a brand new condition. The item "Crystal-G CGCG14 CARAMEL DRIZZLE Hybrid UV LED Soak Off Gel Nail Polish" is in sale since Sunday, November 4, 2018. This item is in the category "Health & Beauty\Nail Care, Manicure & Pedicure\Nail Polish & Powders\Gel Nail Polish". The seller is "miss_uvgels" and is located in Tyne and Wear.
This item can be shipped to United Kingdom.